Overview

Hammerite Smooth Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. It’s a smooth gloss finish that will retain its sheen for years with excellent weather resistance. It’s durable, corrosion resistant decorative coating for ferrous and non-ferrous metals. Primer or undercoat is not necessary for sound surfaces.

Hammerite smooth silver paint is now available with an extra 33% for free to give you the same quality paint at a better price!

• Smooth gloss finish
• Ultra tough paint
• Can be applied direct to rust
• 8 year corrosion protection
• Excellent weather resistance

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.

• Sand/abrade smooth surfaces and remove any loose rust or flaking paint.
• Remove dirt, dust and grease with a solution of diluted detergent.
• Rinse with clean water and allow time to dry.
• Available in different colours.

Application

Before application test Hammerite Smooth Direct to Rust Metal Paint onto the painted surfaces and leave for 1 hour. If there is no reaction continue to apply, if there is a reaction with the previous paint all paint must be removed before applying Hammerite Direct to Rust Metal Paint.

• For Bare Zinc, aluminium and galvanised surfaces firstly apply .
• Do not apply in temperatures below 8°C or above 25°C.
• Lightly stir before use.
• Do not thin.
• On previously painted metal in a sound condition 1 coat should be sufficient.
• On bare or rusty metals 2 coats may be required.
• Ensure all edges and corners are adequately covered to ensure maximum durability.
• On vertical surfaces do not over-apply as sagging will occur.

Note: Always follow the manufacturer instructions found on the tin.